Features:
l Large LED display;
l Static accuracy: ±0.1~1%FS;
l With 12 to 30 VDC working voltage;
l Upper and lower limits of the alarm can be set freely;
l The signal is output with two sets of diode alarm or one set of relay switch;
l Four kinds of units can be switched freely;
l Applied to non-corrosive Gas or low viscosity Liquid
Introduce:
AT2400, with high accuracy and low price, incorporates MEMS technology and custom Application Specific Integrated Circuit (ASIC) technology in the design. The kernel part is micro-machine silicon Pressure Sensor or Ceramic Pressure Sensor. Without the moving parts, it has a long life.
It is very convenient to use. The LED display avoid the error reading from simulate dial. You can use the button in the panel to switch the unit and turn the gauge on and off.
With economic price, high accuracy and convenient to read the display of the LED, this product is an ideal substitute of Mechanical pressure switch and the Mechanical Pressure Gauge. Moreover, we can produce the digital gauge according to your special requirements, and we can also supply OEM service.
Specification:
|
Model No.
|
AT2400A
|
AT2400B
|
AT2400C
|
AT2400D
|
AT2400E
|
AT2400F
|
|
Power Source
|
12～30VDC
|
|
Range
|
10~200kPaA
|
0~1.6MPa
|
0～10MPa
|
0～40MPa
|
0～1.6MPa
|
0～70MPa
|
|
Surface Diameter
|
￠66mm
|
|
Dimension of the Display
|
48mm(L)*18mm(W)
|
|
Display Method
|
4 digits with four different kinds of units and 2 LED alarm lights
|
|
Pressure Display Resolution
|
0.1～0.2%FS
|
|
Static Accuracy
|
0.5%～1%FS
|
0.25%～0.5%FS
|
0.1%～0.5%FS
|
|
Operating Temperature
|
－20～85°C
|
|
Type of Sensor
|
Diffusion silicon pressure sensor
|
Ceramic pressure sensor
|
Silicon piezoresistive stainless steel sensor
|
|
Response Time
|
≤0.1 seconds
|
≤0.2 seconds
|
≤0.1 seconds
|
|
Proof Pressure
|
100%FS
|
|
Burst Pressure
|
150～200%FS
|
|
Port Configuration
|
G1/4-19 or according to customers requirements
|
|
Material of the case
|
ABS or PBT≤GF30
|
|
Material of the pressure Port
|
PBT≤GF30
|
Brass
|
304 stainless steel
|
|
Units for selection
|
Four kinds of units such as PSI, BAR, kPa and kgf/cm2 can be switched freely
|
|
Alarm output (optional )
|
One or two sets of diode (12VDC); one set of relay( 10A is optional)
|
|
Media Compatibility
|
Non-corrosive Gas
|
Non-corrosive Liquid
|
Liquid
|
|
|
|
|
|
|
|
|
Notes:
1. We can produce the digital gauge according to your special requirements such us pressure range, pressure units, connection, the way of giving an alarm, the material and color of the case, etc.
2. We can also supply OEM service.
3. The attached picture is just for your reference.